The software and this documentation is
Copyright (C) 1999 by Herbert Hanewinkel, Neuried
All Rights Reserved.

It is provided as shareware with the following limitations:
This program is copyrighted and it is not in the public domain.
The unregistered shareware version of the software may be freely copied and distributed under the condition that the software must be copied or distributed in the original and unmodified zip file containing the complete package of files (original archive with no files added, modified or removed).
The distribution must be free of charge, except charging for the distribution media itself.
You are prohibited from defeating shareware limits or using an unauthorized password, distributing/including the software in commercial products, modifying or reverse engineering the software.

There is no warranty or claim of fitness or reliability. The program is distributed AS IS, and as such the author shall NOT be held liable for any loss of data, down time, loss of revenue or any other direct or indirect damage or claims caused by this program.

Requirements

• Windows 9x or Windows NT 4.0 workstation configured for TCP/IP

Installation of the DHCP/BOOTP server

1. Unpack the software archive into a directory, e.g.: C:\DHCP
2. Start the server software by double clicking on the DHCP/BOOTP Server icon.

The main windows of the DHCP/BOOTP server displays the addresses known to or observed by the server. The static list displays a list of all configured client addresses and gives information about the last client access. The dynamic list gives all client addresses that received an address from the address pool of the DHCP/BOOTP server. The ignored list shows DHCP/BOOTP requests from clients on your net, that were observed but ignored by the server.
Using the right mouse button, you can transfer entries from the dynamic or ignored list to the static list, to configure profile information for new clients.

Menus

File

View log

displays a protocol of DHCP/BOOTP requests.

Exit

terminates the program

Options

Preferences

general program settings.

Add static address enty

to add client addresses to the servers address list. A hardware address of the client can be bound to a fixed IP address and a configuration profile. If the configuration profile does not exist you are prompted for setting up a new profile.
If the IP address is set to 0.0.0.0 the client will receive an IP address from the dynamic IP address pool of the server.
The addresses are stored in file compatible to the Unix ethers file. Therefore if you want to add a lot of entries it may easier to create the file using an editor or some other tool.

Remove profile

to remove an unused client profile

Default Client profile

to create the default client profile

Help

Contents

starts a HTML browser displaying the manual.

Register

prompts for the license key and your name, company. Check the Info menu to find out if the license information was accepted.

Info

displays program version information.